A1T2C3（CP-LC-1067）
Instructions for Use
Product information
A1T2C3 （CP-LC-1067） is a highly potent ionizable lipid designed for lung-targeted mRNA delivery. When formulated into lipid nanoparticles (LNPs), it produces particles approximately 80 nm in size with excellent uniformity and a high mRNA encapsulation efficiency (>94%). Its most distinguished feature is its exceptional organ selectivity. Following intravenous administration in mice, A1T2C3-based LNPs demonstrated a remarkable accumulation of over 94% of the signal in the lungs, with minimal distribution to other major organs. This makes it a leading candidate for developing therapeutics specifically targeted to pulmonary tissues.
| CAS No. | Not available |
| Chemical Name | A1T2C3（CP-LC-1067） |
| Formula | C54H103N3O8S3 |
| M.Wt | 1,018.61 |
| Purity | >98% |
| Storage | Original product: up to 1 year under the storage conditions stated on the vial, kept tightly sealed. Stock solutions: aliquots at -20°C, generally up to one month. |
| Shipping condition | Ships from Shanghai. Pure lipid is stable during ice-pack transport. |
Formulation & study context
Literature information refers to the cited study and its particular formulation. Administration routes are research context, not clinical instructions or a guarantee of performance.
A complete product-specific formulation has not been verified. No standard ratio is substituted.
| N/P ratio | Not reported in the verified record |
| Cargo | Not available in the verified record |
| Administration route | Not available in the verified record |
| Animal model | Not available in the verified record |
| Formulation process | Not available in the verified record |
N/P is the molar ratio of specified lipid nitrogen groups to nucleic-acid phosphate groups. A lipid:cargo mass ratio is a different quantity and must not be used as N/P.
Stock-solution preparation table
Calculated from the product-page molecular weight: 1018.61 g/mol. Volumes are final solution volumes.
| Lipid mass | 1 mM | 5 mM | 10 mM |
|---|---|---|---|
| 10 mg | 9.817 mL | 1.963 mL | 0.982 mL |
| 25 mg | 24.543 mL | 4.909 mL | 2.454 mL |
| 50 mg | 49.087 mL | 9.817 mL | 4.909 mL |
| 100 mg | 98.173 mL | 19.635 mL | 9.817 mL |
| 250 mg | 245.433 mL | 49.087 mL | 24.543 mL |
Volume (mL) = mass (mg) × 1000 / [MW (g/mol) × concentration (mM)]. These are mathematical conversions, not measured solubility or validated solvent recommendations. Confirm solvent compatibility and the molecular weight of the exact material before use.
Open editable solution calculators →Handling & storage
Provided that storage conditions are as stated on the product vial and the vial is kept tightly sealed, the product can be stored for up to 1 year.
Wherever possible, prepare and use solutions on the same day. If stock solutions must be prepared in advance, store them as aliquots in tightly sealed vials at -20°C. Generally, these will be usable for up to one month.
Before use, and prior to opening the vial, allow the product to equilibrate to room temperature for at least 1 hour.
References
Not available